X-ray Film Properties

Sep 01, 2025 Leave a message

The use of X-ray film and the definition of its properties require a thorough understanding of sensitometrics. Sensitometrics studies the photographic properties of film and the methods for measuring these properties. Under strictly defined conditions, the density (or darkness) of a photographic layer depends on the exposure. Exposure is the combination of the radiation dose impinging on the emulsion, namely, the intensity (symbol I) and the exposure time (symbol t). In sensitometrics, the relationship between exposure and density (I.t) is shown in so-called characteristic curves or densitometric curves.

Optical Density: When photographic film is placed on an illuminated screen and observed, the image appears to consist of areas of varying brightness, depending on the local optical density (number of silver grains) of the developed emulsion. Density (D) is defined as the logarithm to the base 10 of the ratio of the incident light, Io, to the light transmitted through the film, It, thus: D = log (Io/It). Density is measured using a densitometer, as described in the following section. Industrial radiation testing on conventional film covers a density range from 0 to 4, corresponding to a factor of 10,000.

Contrast: Image contrast is defined as the relative brightness between the image and the adjacent background.

The contrast between two densities D1 and D2 on X-ray film is the difference in density between them and is often referred to as "radiological contrast."

Film contrast or emulsion contrast is a relatively vague term describing the inherent overall contrast of a particular film. When an emulsion type exhibits the most image contrast, the film is called "high contrast" or "hard." To measure film contrast, the term "film gradient" is used, with the symbol GD. The suffix D indicates the density at which G is measured.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry