X-ray film is a commonly used material in medical imaging. It has a total thickness of approximately 0.5 mm and consists of seven layers:
*a. Hardened gelatine layer
b. Emulsion layer
c. Substratum (bonding layer)
d. Cellulose triacetate or polyester base
Schematic cross-section of an X-ray film, total thickness approx. 0.5 mm:
The film's core is a transparent cellulose triacetate or polyester base (d). Coated on both sides are:
• A layer of hardened gelatin (a), which protects the emulsion.
• An emulsion layer (b), which is a radiation-sensitive emulsion suspended in the gelatin.
• A very thin layer called a substratum (c), which bonds the emulsion layer to the base.
Therefore, ordinary X-ray film, which has two emulsion coatings, has twice the speed of film with only one emulsion coating. Photographic emulsion is a substance sensitive to ionizing radiation and light, consisting of silver halide microcrystalline particles suspended in gelatin.
Note: In the past, it was not uncommon to perform radiography on paper. In this "instant cycle" process, results became available within 60 seconds. However, the image quality was very poor, and the film had a lifespan of only a few months. The advent of better and faster "instant cycle" technologies, such as digital radiography (described in a subsequent section), has made paper radiography a thing of the past.




